English


German

............. V1.2/2010 .................................

Scilab

This eBook with 160 pages shows the basics of
 modelling mechatronic systems and some analog and
 discrete controller like PID-controller. All this will be
 shown with examples with SCILAB and SCICOS.
 First we will model a mechatronic system consisting
 from a dc-motor and mechanic.

Than we will control this system for position with a PID-controller. We will adjust the controller parameter in bode-diagram and show the stability. At the end we will show some further
 digital controller that you can implement in the
 software C on a microcontroller.

 

..................................V1.1/2014..........................

In this eBook (96 pages) we will show you step by step, how you can program the ARDUINO UNO and MEGA with SIMULINK.

In the first chapter we show the difference between a traditional programming with C and the new method of model-based development that is => model building, simulation and automatic code generation.

Arduino Simulink

..........V1.1/2009......................................

PLC

This eBook describe the PLC
               (programmable logic controller)
with the special focus on
IEC 61131-3 language, that the most programmable controller and also microcontroller accept.

The development of the examples is done here with the FREE Version of the tool  CoDeSys
             (Controller Development System).

How can you buy the eBooks?


.........................................V1.1/2015...................

Most smartphones have the ANDROID OS
and it is programmed with the programming language JAVA.

In this eBook (102 pages), we show you in the first chapter, how to install the necessary and FREE tools (Eclipse SDK, ADT, JAVA). In the second chapter we start the first project. In movies you learn the first steps with the tool ECLIPSE and we will simulate the first example on the emulator. Finally, you will learn the acceleration sensor from the smartphone to read and display the XYZ values ​​on the screen.

To create more apps, you need more than just an activity and to communicate, you need the intents.
We show that in the last two examples.

ANDROID

..............V1.1/2015..................................

Raspberry

In this eBook (126 pages) we explain the basics
of RASPBERRY PI programming step by step.

The hardware and software installation
 is explainad for beginners also with basics to LINUX.

We install the SD-card with the tool NOOBS that a not so complicated as the IMAGE copy. For WINDOWS
users the first steps with LINUX are presented.
For the processing of the data we use
scientific modules SciPy and Numpy
like for example = digital filter, FFT and more.

We will present the results using the MATPLOTLIB module in 2D and 3D plots.

..........................................................V1.1/2015..................

The eBook with 100 pages shows the basics of electrical measurement technology and the basics of programming with the LabVIEW graphical programming language of the company National Instruments.

In the eBook, the following instruments analog multimeter, digital multimeter, digital oscilloscope are explained in detail.

LabVIEW

..........V1.0/2014..............................................

Python

First, in this eBook with 225 pages, you get an
 introduction to the various tools and their installation.

The focus in this eBook on scientific or engineering operation and no great programming. There are a number of books for Python with OOP, Web programming, etc.

Of course, we start with an introduction to the programming language PYTHON. Get explained the first instructions and learn interactively with the SPYDER tool to work.

...............................................V2.4/2009........................

In this eBook (132 pages) you will get step by step the basics of C-programming with the focus on embedded and real-time. The main target device is not the PC with Windows but a small microcontroller without an operating system. We will writ it on our self!
All the C-instructions will be explained on behalf of different examples that are implemented with the FREE tool AVR Studio (free download and no limitation). This tool consist an editor, compiler, linker and simulator. With this simulator you can test and/or modify the examples on the PC without any real hardware (microcontroller).

C microcontroller

You do not learn only the C-language but also to use the development tool and some typical methods and algorithms for embedded and real-time application! You will also learn how to use the compiler, debugger, breakpoint in the tool AVR Studio. This eBook focus on beginners that want to get the first steps in C-programming for microcontrollers!

How can you buy the eBooks?


.............V2.1/2007...............................................

CAN bus

 In this eBook the basics of CAN and CANopen
 will be described step by step. The properties of
 CAN will be shown with some animation and films.
 
 On a simply example gate-control the tool CANoe
 from the company VECTOR will be explained.
 The tool handling is shown in some films.
 
 To the end CANopen and TT-CAN will be
 also described.

.....................................................V1.1/2014........................

In this eBook (104 pages and over 20 examples) the basics of ARDUINO programming are explained step by step.

You need only the ARDUINO UNO for all examples in this eBook and a paper clip made of metal.

We show how you can use digital INPUT and OUTPUT with a metal paperclip. We will use an AD-converter and on the paper clip receive signals from 'air'. PMW signal we will generate and measure. We will use the LED on pin 13.

The focus in this eBook is more on the programming side than sensors, electronics, etc.

ARDUINO

.............V1.0/2006..........................................

SPICE LTSPICE electronic

In this eBook we provide you the basics of electronic simulation with SPICE. Together with the FREE Tool LTSpice from the company Linear Technologies we will show you in some films the possibilities of the simulation language SPICE and also the performance of the tool LTSpice.

You can also download this FREE tool on www.linear.com and try all the examples that you get together with this eBook.

At the end of this eBook we will also use the FREE Tool EAGLE to construct and layout one example board.

 

 

 

..............V1.0/2012................................................

DSP scilab

The basics of Digital Signal Processing (DSP)
with the tool SCILAB are explained
step by step in this eBook with 150 pages.

The focus here is on the practical application
of SCILAB functions and is aimed at beginners
who wanted to apply DSP algorithms.

The functioning of SCILAB is explained
 in films as examples below.

 

How can you buy the eBooks?


.........V1.1/2009......................................................

VHDL FPGA

This eBook provide the basics in VHDL-programming of electronic digital systems.

VHDL is a hardware description language. That means, you can describe a digital system with text like C-programming. This eBook works with the last version VHDL-93.

For the understanding we have some short and most understanding examples that you can see in films working or you can try this examples with the FREE Software VHDL Simili.

With this FREE tool SIMILI, you can model and simulate VHDL-programms.

 
   

.........V1.0/2011.............................................................

digital filter IIR FIR

In this eBook with more than 100 sides the basics of analog and digital filters will be described.

The filter design and analysis will be done with the FREE program Filter Free 3.0 and Spectra from www.nuhertz.com.

 
   

How can you buy the eBooks?

 

.............V1.1/2009................................................

motor BLDC

This eBook with 84 pages shows the
 basics of BLDC Motors (brush less direct
 current). The focus of this eBook are
 DC-Motors that are driven an DC-Voltage
 with the help of frequency converter.

 AC-Motors are not in scope of this eBook
 but we will show how to operate a
 AC-Motor on DC-Supply with a frequency
 converter.


General terms and condition act

© 2003-2015
ebooksmechatronic.com

Last Update: 12.08.2015

 


eMail

email@ebookaktiv.de
 


Buy
all eBooks
 

eBooks only
for Windows

---------------------------
eBooks      prices
---------------------------

  1               5,0€
  3             10,0€

  6             15,0€
  9             20,0€

ALL download
30,0€
ALL on CD
35,0€
(Germany+Europe)

----------------------------

Boost

RTOS

Freeware

SimPy

IoT

MATPLOTLIB

WinAVR

Betriebssystem

FreeRTOS

FreeWare

Echtzeit

YACAS

SysML

SimulationX

Dymola

Modelica

wxMAXIMA

Freeware

CAS

Computer Algebra

MAPLE

MATHEMATICA

YACAS

CAD

Zeichnung

SketchUp

3D

Mechanik

Modelica

SimScape

Hydraulic

Pneumatic

Therm

Raspberry

NumPy

SimPy

SciPy

Physical Computing

IPython

LINUX

NumPy

SciPy

Python

NOOBS

GPIO

VHDL-AMS

SimulationX

ITI

SystemC

SCILAB

SCICOS

Xcos

Raspberry

LINUX

MATLAB

SIMULINK

JAVA

Physical Computing

 IPython notebook

Regelungstechnik

CAN

LIN

FlexRay

MOST

Ethernet

Digitaltechnik

Statecharts

ARDUINO

SCILAB

ECLIPSE

SCICOS

MATLAB

SIMULINK

JAVA

CAN-Bus

LIN-Bus

Ethernet

Statecharts

YAKINDU

Analog Filter

Power Factor Correction

 

...............................................V1.1/2009...........................

This eBook with 112 pages start step by step with the basics of the "old" 20mA LED and the corresponding control strategies.

After that we start with the new high power LED that take more than 1W power consumption.

The following chapters concern on the different constant current control application like  Buck-, Boost- and more. At the end we look also to the important  thermal management and the very new OLEDs.

LED

 
   
 
   

.  

 
   

 

 
   
 
   

....................................................................................................................

   

 

Mechatronik

Steuerung

Buch

eBuch

CoDeSys

MathCAD

SMAth

eBook

e-Paper

e-Book

eBook

booklet

e-buch

e-book

SPICE

PSPICE

Elektronik

Switcher CAD III

LTSpice

EAGLE

Layout

Platine

Spannungsregler

EN 61131-3

SCICOS

SCILAB

MATLAB

SIMULINK

OCTAVE

LabVIEW

Messtechnik

Softcomputing

Fuzzy Logik

Neuronale Netze

Genetische

Algorithmen

Chaos

Diagnose

Prognose

Neuro-Fuzzy

RFID

Barcode

smart label

Identifikation

LED

OLED

WEBENCH

 

(C) 2003-2015  www.ebooksmechatronic.com